AcquaSaver BAS20-S Kurulum ve Kullanım Talimatları - Sayfa 2
Kontrol Ünitesi AcquaSaver BAS20-S için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Talimatları indirin. AcquaSaver BAS20-S 4 sayfaları. Water diversion valve
Sayfayı Yazdır
Introduction
The Acqusaver Valve is a fully automatic mechanical rainwater/mains changeover
device designed for a pressure pump supply system for harvesting rainwater for the
toilet, laundry and household applications with automatic mains water backup. It's
suitable for two toilets, a washing machine and a tap.
Features
Patent design
Easy to install
Watermark approved
Smart Watermark approved
2 year warranty
No regular maintenance required
No electrical consumption or electrical
components
Solid brass construction
Fully waterproof – Built to last
Suitable for any pressure pump with
sufficient head pressure
Can be mounted in any position.
Built-in dual check valve for backflow prevention
Solid Brass mounting bracket (optional)
Specifications
Max Mains Pressure
Max Pump Pressure
Min Pump Pressure
Recommended min pump
cut-in pressure
Max Flow Rate
Max water temperature
Min Water Temperature
Pump Inlet
Mains Water Inlet
Outlet
Weight
*Ensure proper protection against freezing weather
Installation &
Operating Instructions
500 KPa recommended
600 KPa
300 KPa Recommended
2 Bar
50 LPM
40° C
0° C*
25mm 1" BSP F
20mm 3/4" BSP
20mm 3/4" BSP
2.5 Kg
Operation
The AcquaSaver valve will always prioritise the use
of rainwater over mains water when rainwater is
available and will automatically switch to mains
water in the event of the rainwater tank running low
or an electrical failure.
When rainwater has been replenished, or power
has been restored to the pump, the AcquaSaver
valve will always automatically prioritise back to
rainwater.
The pump is only active when rainwater is being
drawn from the rainwater tank; it does not operate
when the AcquaSaver valve has switched to mains
water position.
The pump's controller will start and stop the pump
when it detects a demand, for example, flushing a
toilet.
The operating mechanism of the AcquaSaver valve
is a unique patent design. It works by hydraulic
water pressure created by the pump to close the
mains water inlet, ensuring an extremely reliable
mechanism using few moving parts, no electronic
components and no energy consumption.
Maintenance
The AcquaSaver valve does not require
maintenance; however, there are things you can do
to ensure its most reliable operation:
– Fit a Y-Strainer
– Clean your gutters
– Clean the inlet strainer on the rainwater tank
2
Model BAS20-S Last updated: 21-07-2021