CYP PUV-3050RX-UA Kullanım Kılavuzu - Sayfa 9

Alıcı CYP PUV-3050RX-UA için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. CYP PUV-3050RX-UA 20 sayfaları. Uhd+ hdmi over hdbaset3 receiver with analogue audio i/o & usb 2.0

Sayfayı Yazdır

BYPASS & EXTRACT LEDs: These LEDs will illuminate to indicate if the

unit is in audio bypass or extract mode.

POWER LED: This LED will illuminate to indicate the unit is on and

receiving power.

LINK LED: This LED will illuminate solidly when a live connection with

a compatible transmitter is active.

6.2 Rear Panel

USB 2.0 Port (Micro-B) & LED: Connect directly to a standard USB

host such as a PC or laptop to extend their USB functionality to

all currently connected USB devices on both ends of the HDBaseT

connection. The LED will illuminate solidly to indicate when the USB

port is active.

Note: If USB hosts are connected to both the transmitter and receiver at

the same time, only the most recently connected host will be active.

CAT6A/7 IN Port: Connect to a compatible HDBaseT transmitter with

a single Cat.6A/7 cable for extension of all data signals. Power via PoH

will also be supplied to this unit when connected to a compatible PSE

transmitter.

Note: A compatible PoH (PSE) transmitter is REQUIRED to power this

receiver.

HDMI IN Port: Connect to HDMI source equipment such as a media

player, game console, or set-top box.

Note: If this HDMI input is connected, its video will automatically be

output over the local HDMI output, overriding any current HDBaseT video

source.

HDMI OUT port: Connect to an HDMI TV, monitor, or amplifier for

digital video and audio output.

USB

CAT6A/7 IN

HDMI IN

HDMI OUT