CYP CH-110RX Kullanım Kılavuzu - Sayfa 7

Genişletici CYP CH-110RX için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. CYP CH-110RX 12 sayfaları. Hdmi & ir over cat6 extender

6. OPERATION CONTROLS AND FUNCTIONS

IR OUT

HDMI IN

IR OUT: Connect the IR Blaster cable included in the package for

IR signal transmission. Pace the IR blaster in direct line-of-sight of

the equipment to be controlled.

HDMI IN: This slot is where you connect the HDMI or DVI output port

of your source equipment such as DVD/Blu-ray players or Set-Top-

Box with an HDMI cable or link up with another receiver unit from

the same family type to extend a signal over long distance.

DC 5V: Connect from 5V DC power supply into the unit and

connect the adaptor to an AC outlet.

SERVICE: This slot is reserved for factory use only.

CAT6 OUT: Connect the CAT6 output of the Transmitter with the

CAT6 input of the Receiver with CAT6 cable.

Note:

A. Cable tested with CAT6/23AWG/Solid, using cables of another

types may result in different operating distance.

B. Equipment used in cable distance testing included: PS3 120G, 37"

Philips 8 bit LCD TV and 37" Samsung 12 bit LCD TV.

C. Figures provided in this manual are for reference only, actual

performance may depend on the source and display used along

with the type of cable.

DC 5V

SERVICE

CAT6 OUT