Ashford DOUBLE TREADLE KIT Talimatlar Kılavuzu - Sayfa 2
Dokuma Aletleri & Aksesuarları Ashford DOUBLE TREADLE KIT için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Ashford DOUBLE TREADLE KIT 6 sayfaları. Traveller single or double drive
Ayrıca Ashford DOUBLE TREADLE KIT için: Talimatlar (2 sayfalar), Talimatlar (2 sayfalar), Talimatlar (2 sayfalar)
Sayfayı YazdırASSEMBLY INSTRUCTIONS FOR DOUBLE TREADLE KIT
FOR ASHFORD ELIZABETH SPINNING WHEEL
Assembly Sequence
Please read these instructions right through before
commencing.
Finishing the Wood
We recommend the wood surfaces be sealed
before assembly. This protects the kiln dried wood
from climatic changes and enhances its beauty.
Use either the Ashford Wax Finish or the same fin-
ish as the rest of your wheel.
Special Features
Easy to start - no need to use your hands. Just start
treadling. Enjoy comfortable heel and toe action.
New treadling action - the cranks are off set 10 de-
grees so you can start the wheel in either direction.
Remove from the crank
the split pin with a pair of pliers.
the O-ring with a pin or needle
the E-clip with a small screwdriver.
Take off old conrod from the crank.
Good posture - when you use both feet to treadle
your body is naturally in balance.
Less muscle fatigue - the Double Treadle Kit reduc-
es ankle, leg and hip fatigue.
Update kit - your spinning wheel has now been
updated with the new crank and con rod joints for
smooth silent spinning.
Tools Required
slot or
philips (pozi)
Remove the hub pin. Use the nail provid-
ed and a hammer.
Note: on earlier models the hub pin
is in the middle of the hub. Avoid
damaging the spokes. Place a flat
steel object such as pliers or a span-
ner over the nail and hammer it.
2