Ashford TRADITIONAL SPINNING WHEEL Talimatlar Kılavuzu - Sayfa 13
Dokuma Aletleri & Aksesuarları Ashford TRADITIONAL SPINNING WHEEL için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Ashford TRADITIONAL SPINNING WHEEL 18 sayfaları.
Sayfayı Yazdır
Thread 12 hooks into the
DOUBLE DRIVE
flyer.
Step 22 - 32 For Double Drive only. For Single Drive go to Step 12.
Thread 12 hooks into the
Thread 12 hooks into the
flyer.
flyer.
Thread 12 hooks into the
flyer.
Screw 12 hooks into
the flyer
Assemble the flyer unit.
Assemble the flyer unit.
Assemble the flyer unit.
Assemble the flyer unit.
Check the shape of the
Check the shape of the
Check the shape of the
nylon bearing on each
Check the shape of the
maid upright, wax the
nylon bearing on each
nylon bearing on each
nylon bearing on each
dowel ends, then insert
maid upright, wax the
maid upright, wax the
maid upright, wax the
into the correct hole.
dowel ends, then insert
dowel ends, then insert
dowel ends, then insert
Insert the drive belt
into the correct hole.
into the correct hole.
adjusting knob into the
into the correct hole.
maiden bar, turn until the
Insert the drive belt
Insert the drive belt
Insert the drive belt
end just protrudes.
adjusting knob into the
adjusting knob into the
adjusting knob into the
maiden bar, turn until the
maiden bar, turn until the
maiden bar, turn until the
end just protrudes.
end just protrudes.
end just protrudes.
Check the angle of the
nylon bearings. Then secure
the maid uprights with
screws and washers. Do
not overtighten. The maid
uprights may be twisted
to remove the bobbin.
Position the drawing pin
directly beneath the drive
band adjusting knob.
13