CYP CHDBT-1H1CE Kullanım Kılavuzu - Sayfa 9
Kablolar ve konektörler CYP CHDBT-1H1CE için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. CYP CHDBT-1H1CE 17 sayfaları. 1x2 hdmi over hdmi and cat5e/6/7 splitter with ir/rs-232, lan serving and bidirectional poe
Sayfayı Yazdır
6.2 Rear Panel
1
POWER LED: The LED will illuminate when connected to an active
power supply.
2
DC 24V: Connect the 24V DC power supply to the unit and plug
the adaptor into an AC outlet.
IR 1 BLASTER: Connect the supplied IR Blaster cable for IR signal
3
transmission. IR signals received by an IR extender connected to
the receiver unit will be transmitted by this blaster. Place the IR
Blaster in direct line-of-sight of the equipment to be controlled.
IR 2 EXTENDER: Connect an IR Extender cable for IR signal
4
reception. Signals received will be transmitted from any IR blaster
connected to the receiver unit. Ensure that the remote being used
is within the direct line-of-sight of the IR Extender
5
USB: This slot is reserved for firmware update only.
6
LINK LED: This LED will illuminate when connected to a Receiver unit
that is connected with a TV/monitor that is displaying the signal.
7
CAT5e/6/7 OUT: Connect to a CAT5e/6/7 to HDMI Receiver (with
or without PoE) with a single CAT5e/6/7 cable each to extend the
HDMI signal up to 100 m.
IR 1
POWER
BLASTER
DC 24V
EXTENDER
1
2
3
USB
LINK
IR 2
CAT5e/6 OUT
4
5
6
7
4