CYP CHDBT-1H2CE Kullanım Kılavuzu - Sayfa 9

Kablolar ve konektörler CYP CHDBT-1H2CE için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. CYP CHDBT-1H2CE 16 sayfaları. 1×3 hdmi over hdmi and cat5e/6/7 splitter with poe and lan serving
Ayrıca CYP CHDBT-1H2CE için: Kullanım Kılavuzu (16 sayfalar)

Sayfayı Yazdır
CYP CHDBT-1H2CE Kullanım Kılavuzu

6.2 Rear Panel

LAN
1
1
LAN
Connect to an internet or network connection.
2
IR A1/B1 IR Extender
Connect to the IR extender for IR signal reception of the remote
control of this deice or the source and display equipment. Ensure
that remote being used is within the direct line-of-sight of the IR
extender for it will send out the signal to designate receiver's IR
output port.
3
IR A2/B2 IR Blaster
Connect to the IR blasters for IR signal transmission. Place the IR
blaster in direct line-of-sight of the equipment to be controlled for
it will blaster out the IR signal received from the IR Digital Eye.
4
MODE LED
When the device is power on the LED will flash.
5
CAT5e/6 OUT A & B
Connect these ports to HDMI to CAT5e/6/7 receivers (with our
without PoE function) with CAT5e/6/7 cable to extend the signal
up to 100m.
6
LINK LED
When the device is power on and this slot is connected from
receiver device with CAT5e/6/7 cable the LED will illuminate.
CAT5e/6 OUT
IR A1
IR A2
Extender
Blaster
MODE
2
3 4
IR B1
IR B2
A
Extendrt
Blaster
LINK
5
6
2
CAT5e/6 OUT
B
MODE
LINK
3
4
5
6
4