CYP III PU-507WPRX Kullanım Kılavuzu - Sayfa 8
Alıcı CYP III PU-507WPRX için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. CYP III PU-507WPRX 12 sayfaları. 5-play hdbaset wall plate receiver
Sayfayı Yazdır6. OPERATION CONTROLS AND FUNCTIONS
1 2
1
IR 1Extender: This slot is to connect with the IR receiver cable
included in the package for IR signal receiving.
2
IR 2 Emitter: This slot is to connect with the IR blaster cable included
in the package for IR signal transmitting.
3
RS-232 OUT: This slot is to connect with D-Sub 9-pin cable from
device equipment for receiving RS-232 commands.
4
LAN: Connect to an active network for LAN serving and TELNET/Web
GUI control.
When the transmitter or any compatible LAN equipped receivers are
connected to a network, this allows the network access (including
internet access if available) to be shared between the transmitter and
receiver. Connect any Ethernet equipped device e.g. a Smart TV or
games console to the LAN port of a receiver for that device to share
the network/internet access.
5
HDMI OUT: This slot is to connect with HDMI TV/monitor for display
HDMI input source signal.
6
Power LED: This green LED will illuminate when the device is
connected to a power supply.
7
LINK LED: This yellow LED will illuminate when the both CAT5e/6
input and output signal is connected.
8
IR 1 Extender
IR 2 Emitter
RS-232
OUT
LAN
3
4
LINK
POWER
HDMI OUT
5
6
7