DOLFINOS The Cello Grip-Foot M6 Thread Edition Manuel - Sayfa 3

Müzik Enstrümanları İçin Aksesuarlar DOLFINOS The Cello Grip-Foot M6 Thread Edition için çevrimiçi göz atın veya pdf Manuel indirin. DOLFINOS The Cello Grip-Foot M6 Thread Edition 4 sayfaları.

Sayfayı Yazdır

H OW TO MO UNT

1. Insert the balljoint screw (c) with the pro-

vided allen key (h)

2. Start by putting the lip of the grip sole

(b) over the plate (a) by placing the keyway

(where the small logo is) into the notch of the

plate

3. Screw the cylindric coupling part (d) onto

the balljoint screw (c), sticking out of the

plate by using the allen key (h). Please read 2.

Special Remarks before doing this

4. Add the rubber sleeve (e) to your endpin.

The round end of the rubber sleeve should

face down. If the rubber sleeve is too tight,

wetten the M6 coupling part to make it easier

to mount

6. Slip the silicon washer (g) onto the M6

coupling part (f)

7. Then screw the M6 coupling part (f) onto

your endpin. Make sure to tighten the M6 cou-

pling part enough so that the washer is firmly

pressed together. This prevents the coupling

part from loosening (through vibrations)

8. The M6 coupling part has a built-in magnet

allowing for a convenient click and go mecha-

nism, making it easy to remove and reattach

9. For the best grip of the lamella, make sure

to put the Cello Grip-Foot in front with the

logo facing up towards you

10. The smoother and cleaner the floor, the

better the lamellar structure adheres

Caution: with very dirty or uneven surfaces,

the floor adhesion will be reduced!