Ashland FlexExtend Operatör El Kitabı - Sayfa 6

Endüstriyel Ekipmanlar Ashland FlexExtend için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. Ashland FlexExtend 19 sayfaları. Skatewheel conveyor

Sayfayı Yazdır

The FlexExtend ships fully assembled. The unit arrives with the height (top of wheel) at the

lowest position. In most applications a slope of 3" per 10' is sufficient but some applications

may require more or less slope.

The conveyor can be adjusted from a minimum top of wheel of 28" to a maximum of 43".

Best performance will be achieved by adjusting the conveyor to a constant slope. Adjust the

height by loosening the knobs on both sides of an individual leg while another person raises

or lower the conveyor. Once the desired top of wheel is achieved tighten the knob by hand

snugly. Measure both sides to ensure both sides are the same height.

Height Adjustment

Figure 1 - Adjusting Conveyor Height

Phone

800-587-0045

419-281-1096

Fax

1919 Cellar Dr. Ashland, Ohio 44805