Cypress PSoC CapSense Hızlı Başlangıç Kılavuzu - Sayfa 2

Mikrodenetleyiciler Cypress PSoC CapSense için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Cypress PSoC CapSense 2 sayfaları. Expansion board kit

Sayfayı Yazdır

Programming with PSoC 3 Development Kit

1. Plug the USB cable into your PC and to J1

of the PSoC 3 Development Kit.

2. Open BMM_USB_KIT-030 code example

from the PSoC Creator start page.

3. Click the Program icon in PSoC Creator to

program the board.

4. Unplug the USB cable to disconnect power

from the board.

Note: Connect jumper J2 on the Matrix Button

Module board to SHLD.

For the latest information about this kit, visit

http://www.cypress.com/go/CY8CKIT-031

trademarks referenced herein are the properties of their respective owners.

ENSE

QUICK START GUIDE

CY8CKIT-031 Hardware Overview and Features

2x20-Pin

Connector for

DVK Interface

1x5-Pin Connector for I2C Interface

EXPANSION BOARD KIT

Test PSoC CapSense EBK with PSoC 3

DVK

1. Connect J1 of the PSoC CapSense

Expansion Board Kit to Port D of the

PSoC 3 Development Kit; connect J2 to the

Matrix Button Module Kit. Remove the

LCD from the development kit to avoid

parasitic capacitance.

2. Connect the USB cable to J2 of the PSoC 3

Development Kit and wait for USB

Enumeration LED, LED4 to turn on. Refer

to UG mentioned in step 4 for more details.

3. Touch a button; the corresponding row and

column LEDs turn on.

2x22-Pin

Connector for

CapSense

Interface

Doc.#: 001-66478 Rev. *B