Akron 3462 Talimatlar Kılavuzu - Sayfa 4

İtfaiye Ekipmanları Akron 3462 için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Akron 3462 17 sayfaları. Forestry bumper monitor
Ayrıca Akron 3462 için: Kurulum, Çalıştırma ve Bakım Talimatları (18 sayfalar)

Sayfayı Yazdır

INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS

FIGURE 1

Side View

Electrical Installation Instructions

A. JOYSTICK AND VALVE ATTACHMENT

The following steps will prepare the joystick and valve for attachment to control the harness.

STEP 1

Plug Power and Valve Harness (part #721564 Figure 4) into Control harness power/valve connector

on the monitor (Figure 2).

STEP 2

Plug either end of the CAN Communications Harness (part #721565 Figure 4) into Control box

CAN connector located on the monitor (Figure 2).

STEP 3

Plug the remaining end of the CAN Communications Harness (part #721565) into the CAN

Joystick.

STEP 4

Plug the mating end of the Valve Harness (part #721290) into the Power and Valve Harness (part

#721564) valve connector located at the vehicle end of the harness.

STEP 5

Plug the remaining end of the Valve Harness (part #721290) into the Valve Actuator Motor

connector.

STEP 6

Recognizing that as the monitor moves in the rotation axis, the three cables move with it. You must

allow sufficient free length of the cables before affixing to a stationary point. Assure that the cables

experience no sharp bends throughout the rotation range of travel.

B. BATTERY ATTACHMENT

The Battery connection should be the last connection made.

Connect the flying leads at the end of the Power and Valve Harness (part #721564) opposite the monitor to a

switched battery power source. The black lead should connect to the battery negative, and the red lead to battery

positive. Use butt splices or other appropriate method of choice.

C. MECHANICAL MONITOR ATTACHMENT

The Bumper Monitor is to be mounted on the waterway with a 2" NPT thread. The front of the monitor is identified

in Figure 2. The 2" NPT inlet will have the Quick Disconnect Latch Pin Hole facing to the right when looking

towards the vehicle.

PHONE: 800.228.1161 | WEBSITE: www.akronbrass.com

Sheet: 122386

STYLE 3462 FORESTRY BUMPER MONITOR

Revision 12/2022

Top View

Page: 4 of 17