Cypress CYTVII-B-E-1M-SK Hızlı Başlangıç Kılavuzu - Sayfa 6

Anakart Cypress CYTVII-B-E-1M-SK için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Cypress CYTVII-B-E-1M-SK 19 sayfaları.

Firmware Usage

This chapter explains the operation of pre-installed firmware.

2.1

1. Connect the PC and the target and start the terminal software.

2. On the terminal software, select the port this board is connected to.

3. Set the line feed code to LF only Receive Side.

4. Set the baud rate as 115200.

5. Press the reset switch to display the menu.

See CYTVII-B-E-1M-SK Evaluation Board User Guide about reset switch location.

CYTVII-B-E-1M-SK Evaluation Board Quick Start Guide, Doc. # 002-25315 Rev. **