Cypress MB95F212H Nasıl Yapılır - Sayfa 6

Anakart Cypress MB95F212H için çevrimiçi göz atın veya pdf Nasıl Yapılır indirin. Cypress MB95F212H 14 sayfaları. How to make on-board debug

F²MC - 8FX Family, MB95200 Series, How to make on-Board Debug

Figure 6. In-system Debugger Interface

Pin 4 of the connector is used to connect to the reset circuit. Design a switch K1 between the reset circuit and the

reset pin (RSTX). When debugging operation is over, K1 can be switched on to supply the reset circuit to the target

MCU.

www.cypress.com

Document No. 002-05390 Rev.*A