Cypress CLUX-14CEC Kullanım Kılavuzu - Sayfa 4

Medya Dönüştürücü Cypress CLUX-14CEC için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Cypress CLUX-14CEC 5 sayfaları. 1x4 hdmi 1.3 splitter
Ayrıca Cypress CLUX-14CEC için: Kullanım Kılavuzu (12 sayfalar), Kullanım Kılavuzu (6 sayfalar)

Sayfayı Yazdır
Cypress CLUX-14CEC Kullanım Kılavuzu
Rear Panel
Connection and
Installation
When the EDID is switched to TV, the unit will detect the first HDMI output EDID
and record/save it in the unit. If the display attached to the first output source is DVI it
will skip to next output until the first HDMI is detected.
⑦ Sys. Reset switch: It is suggested to always turn this setting OFF, unless
performing a system reset. By turning it to on, the system will reset
all TVs connected to the splitter to their HDMI input 1 once every 8~10 minutes.
Factory default is set as OFF.
Note:
The system reset switch only functions on displays with built-in CEC feature.
① HDMI Input: This slot is where you connect the output port of your HDMI /
DVI source (i.e., DVD, set-top box) using a HDMI / HDMI to DVI adaptor cable.
② HDMI output 1/2/3/4: These slots connect from the splitter to the input ports of
the HDMI displays. If there's more than one output connected, all
HDMI outputs will display an identical image.
③ Power: This is the slot where you insert the 5V DC power supply for
electrical power from an AC outlet.