Cypress CM-1392M Kullanım Kılavuzu - Sayfa 7

Medya Dönüştürücü Cypress CM-1392M için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Cypress CM-1392M 16 sayfaları. Video and l/r to hdmi scaler box

Sayfayı Yazdır

7. Operation Controls and Functions

The following sections describe the hardware components of the unit.

7.1 Front Panel

POWER

①

① Power button and LED indicator:

Press the button once to power on the unit, press again to power off.

When the unit is powered on, one of the input LED will illuminate

depending on your last selection of input source before power off.

The factory default setting for the input is CV (Composite Video).

The green LED illuminates when composite video is selected.

The Yellow LED illuminates when S-Video is selected.

② Input select button:

Press the button to select your desired input source between Composite

Video and S-Video.

③ IR Sensor: Infrared ray remote control sensor.

④ Menu/Enter: This button serves two purposes.

a. Press the button to select your desired input source between

Composite Video and S-Video.

b. To act as a " Enter " key to enter sub menu of your selection item or to

adjust value of the selected item.

⑤ +/- button:

Press the button to move up or down the tick " V " to your desired

parameter. Or after a parameter is elected by pressing MENU/ENTER

button, press the button to alter the value of your selected parameter.

INPUT

②

CM-1392M Video to HDMI Scaler Box

③

④

⑤