Dolmar 111 Servis Kılavuzu - Sayfa 17
Testere Dolmar 111 için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Dolmar 111 19 sayfaları.
Sayfayı Yazdır
- 1. Table of Contents
- 2. Index Technical Data
- 3. Special Tools
- 4. Chain Brake
- 5. Clutch, Clutch Drum
- 6. Oil Pump
- 7. Ignition System
- 8. Starter Assembly
- 9. Carburettor, Intake System
- 10. Cover System, Air Filter
- 11. Vibration Dampers, Handle
- 12. Fuel Tank
- 13. Cylinder and Piston
- 14. Crankcase, Crankshaft
- 15. Checking Operations
- 16. Torques
DOLMAR GmbH
11 Crankcase, crankshaft
1
3
11-01 Replacing the radial sealing rings
Tightly screw tool (1), no. 944 500 900, into
the sealing ring (2) and withdraw it from the
crankcase by means of the spindle (3).
11-03 Removing the crankcase
After removing the attachment screws,
separate the crankcase using a plastic
hammer.
5a
11-03 Crankcase is divided
into a clutch side -KS- (5) including the oil
reservoir and the intake pipe (5a).
Note: Housings supplied as spare parts are
already fitted with needle bearings and radial
sealing rings.
2
4
5
S
11-03 Dismantling the crankcase
For dismantling the crankcase and oil
reservoir remove the seven attachment
screws.
4
11-03 Crankcase is divided
into a magnet side -MS- (4) including the oil
reservoir (4a) and tank closing mechanism.
6
7
11-03 Assembling the crankcase halves
Start by inserting the crankshaft (6) into the
-KS- half. Place the seal (7) and press both
halves together.
S
4a
17