Ashly ne1600.70 Kullanım Kılavuzu - Sayfa 4
Amplifikatör Ashly ne1600.70 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Ashly ne1600.70 12 sayfaları. Network enabled two channel power amplifiers
Ayrıca Ashly ne1600.70 için: Kullanım Kılavuzu (12 sayfalar), Kullanım Kılavuzu (16 sayfalar)
Sayfayı Yazdır
Operating Manual - NE Two Channel Power Amplifiers
ne1600 Models
R ATED
W ATTS
Stereo Mode
450
Both Channels Driven
800
20Hz - 20KHz 1% THD
400*
1600
Bridged Mode
ne2400 Models
R ATED
W ATTS
Stereo Mode
700
Both Channels Driven
20Hz - 20KHz 1% THD
1200
600*
Bridged Mode
2400
* Values indicated by an asterisk are intended as guidelines only. Amplifier is not rated for this load impedance
and may self-protect depending on load and program.
All NE two channel power amplifiers come standard with XLR and Euroblock input connectors, and SpeakON/Euroblock
output connectors. All models include balanced analog inputs, bridge mono mode, an 80Hz hi-pass filter, input sensitivity switch,
full Ethernet control using Protea
Analog Aux Outputs on XLR and Euroblock connectors. The Aux Outputs are buffered signals taken just before the power
amplifier stage. If there is no DSP installed in the amplifier, the Aux Outputs are simply a buffered signal matching the inputs.
If the amplifier has DSP, Aux Outputs can be independently configured along with the two main amplifier channels with custom
DSP processing and input source, including AES3 or network audio sources if installed.
Additional options are available for the NE two channel power amplifiers including the following:
1) Internal DSP Processing - With this factory installed option, and using Protea
amplifier input channel can be configured with pluggable DSP blocks to have its own dynamics control, gain functions, graphic
and/or parametric EQ, Hi-pass/Lo-pass filters, time delay, metering, and test signal generator. A mixer section with assignable
routing allows any input to drive any or all amplifier outputs. Outputs have the same DSP functions as inputs, with the addition
of a fast, automated crossover setup. Both inputs and outputs can copy/paste their settings to other channels, or can link with
one or more other channels to track their settings.
Presets can be used to store and retrieve global parameters of an amplifier's control surface and DSP section from a file.
In addition, Sub Presets allow for a collection of individual DSP function parameters within and across both channels of an
amplifier to be stored and recalled as a set, affecting only those parameters which have been tagged. Up to 35 presets/subpresets
can be stored within the amplifier, and can be recalled in real time via Ethernet from a computer using Protea
2) AES3 Input - Using an optional input card, this amplifier can accept AES3 stereo digital inputs. This protocol allows 2
channels of digital audio to be transmitted over a single cable, thus maintaining a completely digital signal path until just before
the power amplification stage. 48kHz & 96kHz data rates are supported.
3) Network Digital Audio - Ashly currently supports CobraNet and Dante network audio options that can be ordered
and factory installed when purchasing the amplifier. CobraNet
network protocol which allows distribution of multiple channels of real-time, high quality digital audio over a standard Ethernet
Network. Dante™, created by Audinate, is an Ethernet based digital AV network technology that uses existing 100MB or 1GB
network infrastructure for delivery of high performance, high channel count audio signals.
4
ne1600
ne1600.10
RATED
RATED
RATED
VOLTS
LOAD Ω
WATTS
800
60
8
512*
56.6
4
256*
28.3*
2*
128*
113
8
1600
ne2400
ne2400.10
RATED
RATED
RATED
VOLTS
LOAD Ω
WATTS
1200
74.8
8
1152*
69.3
4
576*
34.6*
2*
288*
139
8
2400
ne
software, remote standby for power up, and DC remote level control. Also included are
ne1600.70
RATED
RATED
RATED
RATED
VOLTS
LOAD Ω
WATTS
VOLTS
100
12.5
800
64*
8*
613
32*
4*
522*
16*
2*
261*
200
25
1600
RATED
RATED
VOLTS
LOAD Ω
100
8.3
96*
8*
48*
4*
24*
2*
200
16.7
®
www.cobranet.info
is a combination of software, hardware and
RATED
LOAD Ω
70
6.1
70
8
45.7*
4*
22.9*
2*
140
12.3
ne
(network enabled) software, each
ne
software.