Ashly ne8250peD Kullanım Kılavuzu - Sayfa 11

Amplifikatör Ashly ne8250peD için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Ashly ne8250peD 20 sayfaları. Network enabled multi-channel power amplifiers

Sayfayı Yazdır

Operating Manual - NE Multi Channel Power Amplifier

neWR-5 Networked Programmable Button Controller - The neWR-5 remote control is a networked version of the WR-5, us-

ing Ethernet instead of the data port to communicate with the amplifier. Connecting and powering the neWR-5 is done using Cat-5

Ethernet cable and a Class 1 IEEE 802.3af Power over Ethernet (PoE) switch, hub, or in-line PoE injector. If PoE is unavailable,

the Ashly RPS-18 (sold separately) is a 15-48VDC power supply capable of at least 2 watts per neWR-5 and can be hard wired to

the back of the neWR-5. PoE current draw is 38mA @48VDC and 80mA@15VDC. A decora cover plate (not included) can be

purchased at hardware stores to cover the neWR-5 electrical box and satisfy the aesthetic needs of the installation.

The neWR-5 appears in the software device menu tree and must be assigned within it's device window to a specific amplifier. The

neWR-5 has six programmable function buttons which can light up green, red, or amber to display status. Further information on

LED status is found in the neWR-5 owner's manual, available on the Ashly website. To the right of the function buttons is a pocket

in the mylar overlay for a printed function label to be inserted, also available as a template on the website. The two other buttons

are used to adjust function parameters such as gain or preset number, and are indicated by the LED display. Without DSP installed

in the amplifier, neWR-5 functions are limited to preset recall and mute. Note: To use the neWR-5 as a remote level control, a (ne)

WR-5 Remote Gain tool must be placed in one of the DSP processing blocks of the channels(s).

There is also a hard-wired Lock-Out feature on the neWR-5, where the closing

of a switch wired to the lockout Euroblock renders all buttons inactive.

FR-8 and FR-16 Networked Fader Controller - The FR-8 (shown at right)

and FR-16 are Ethernet based remote fader control units, with the ability to

assign each fader control of one or more input or output DSP gain stages or

level control for a DSP matrix mixer point. The button LEDs for each fader

Ashly Remote App for iPad

neWR-5 Networked Programmable Button Controller

are normally used to indicate as-

signable signal level/clip or mute

status, but can alternately select A/B signal source for that fader. The FR remotes can

be wall mounted to electrical box, panel mounted, or freestanding, and have a back

panel contact closure for full front panel lockout. See further details in the FR-8/16

owner's manual on the Ashly website.

Ashly Remote App for iPad

for the iPad

can be designed using the <Ashly Remote> application, available free on

iTunes

or via the Ashly website. Controls, labels, and images are combined to manage

key amplifier functions over a wireles network connection.

FR-8 Networked Fader Controller

- A custom and secure touch-screen control surface