Ashly Protea NE8250.10 Kullanım Kılavuzu - Sayfa 9

Amplifikatör Ashly Protea NE8250.10 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Ashly Protea NE8250.10 20 sayfaları. Network enabled multi-channel power amplifiers
Ayrıca Ashly Protea NE8250.10 için: Kullanım Kılavuzu (16 sayfalar), Kullanım Kılavuzu (16 sayfalar), Teknik Özellikler (2 sayfalar), Şartname Sayfası (2 sayfalar), Kullanım Kılavuzu (16 sayfalar), Kullanım Kılavuzu (16 sayfalar), Kullanım Kılavuzu (20 sayfalar)

Operating Manual - NE Multi Channel Power Amplifier

WR-1 Remote Level Control - The WR-1 is a dual potentiometer remote volume control designed to mount in a standard single

US electrical wall box, and is wired to the amplifier back panel Euroblock connector labeled "Remote Level Control" using four

conductor wire. Installed DSP is not required for WR-1 remote level control. If wiring a custom potentiometer assembly other than

the WR-1, connect +5V from the Remote Level Control Euroblock connector to the potentiometer's CW pin, GND to the CCW

pin, and the channel under control to the wiper. Do not connect the WR-1 remote level control ground to any other external grounds.

WR-1 Remote Level Control

WR-2 Remote Preset Recall Switches - The WR-2 (shown

at right) allows selection of one of four presets via interlocking

pushbutton switches. Each pushbutton switch can be connected to

a Preset Recall Pin on the back panel of the amplifier. The termi-

nal numbers correspond to the first 4 device presets stored in the

amplifier. Pressing any button will select the corresponding preset.

Windows are provided by each switch for a user-generated label.

WR-2 Remote Preset Recall Switches

WR-1.5 Remote Level Control and Preset Recall Switch - The WR-1.5 (shown at left) combines

one potentiometer for remote level control with a four position rotary switch for preset recall.

WR-1.5