Ashly TRA-4150 Teknik Özellikler

Amplifikatör Ashly TRA-4150 için çevrimiçi göz atın veya pdf Teknik Özellikler indirin. Ashly TRA-4150 2 sayfaları. Tra-series
Ayrıca Ashly TRA-4150 için: Teknik Notlar & Özellikler (2 sayfalar), Kullanım Kılavuzu (16 sayfalar), Kullanım Kılavuzu (12 sayfalar), Kullanım Kılavuzu (12 sayfalar), Teknik Özellikler (2 sayfalar), Kullanım Kılavuzu (13 sayfalar)

Sayfayı Yazdır

Professional Power Amplifiers

TRA Series

TRA 2075 | TRA 2150 | TRA 4075 | TRA 4075

Ashly's TRA-Series expands on the SRA's concept of "the right amp for the

job." These 2RU amplifiers utilize our state of the art technology to create

advanced, efficient amplifiers perfect for low impedance, 25V, 70V or 100V

installations with modest power requirements. Four models available in two-

and four-channel configurations, with power ratings of 75W and 150W per

channel @ 4 ohms, 70V and 100V.

All audio controls of the TRA-Series amplifiers are on the rear panel or internal.

A six-step LED meter for each channel lets you monitor all levels. All TRA am-

plifiers can drive four or eight ohm loads and 70V and 100V constant voltage

lines simultaneously. Output transformers are internally mounted. The 150W

models are capable of driving 25V constant voltage lines using the direct

coupled 4 ohm output.

TRA-Series amplifiers incorporate a switch-mode-power supply and Class-D

amplifier circuitry, providing an extremely power-efficient solution. All TRA-

Series amplifiers are convection-cooled, so there's little maintenence after

the installation, and no annoying fan noise. Of course you get the reliability,

superior sonic quality and rugged construction you've come to expect from

Ashly.

Features include: convection cooling, extremely low noise, an internally

switchable 120V/240V power supply (internal), extensive protection circuitry,

euroblock inputs and screw terminal outputs. Front panel features include:

mains power switch and an LED signal level meter indicating –24dB, -18dB, -

12dB, -6dB, -3dB and clip alert for each channel. Rear panel features include:

level attenuators for each channel, rear panel switches to select between

two choices of input sensitivity, remote power turn-on/off and adjustable

turn-on delay up to eight seconds.

TRA Series specifications

Features:

•

Convection cooling

•

Extremely low noise

• Internally Mounted Constant Voltage

Transformers

•

Switchable 120V/240V power supply

(internal)

•

Extensive protection circuitry

• Safety/Compliance: cTUVus/FCC,

CE, RoHS

Front panel:

•

6-Step Signal Level and Clip LEDs

Rear panel:

•

Level attenuators for each channel

•

Euroblock inputs

•

Screw terminal outputs

•

Selectable input sensitivity

•

Remote power turn-on/off

•

Adjustable turn-on delay up to eight

seconds

Watts per channel

Model

8 ohms

4 ohms

TRA-2075 40

TRA-2150 80

150

TRA-4075 40

TRA-4150 80

150

70V/100V

150