Cypress CH-1507RX Kullanım Kılavuzu - Sayfa 8
Anahtar Cypress CH-1507RX için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Cypress CH-1507RX 16 sayfaları. Hdmi to cat5e/6/7 transmitter and receiver with lan/ir/rs-232/poe
Sayfayı Yazdır
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Transmitter Front and Rear Panels
Front
HDMI In
1
2
1
HDMI IN: Connect to HDMI source equipment such as a DVD or
Blu-ray player.
2
LAN: Connect to an active network for LAN serving. This allows
network access (including internet access if available) to
be shared to any device (e.g. a smart TV or games console)
connected to the LAN port of the receiver
Warning: DO NOT connect the LAN connection to the CAT5e/6/7
output, doing so may trigger a power shut down and may damage
the device.
3
RS-232 IN: Connect to a PC or laptop with D-Sub 9-pin male cable
for the transmission of RS-232 commands.
4
POWER LED: This blue LED will illuminate when the device is
connected to a power supply.
5
DC 48V: Connect the 48 V DC power supply to the transmitter and
Plug the adaptor into an AC outlet.
6
IR 1 BLASTER: Connect an IR Blaster cable for IR signal transmission.
IR signals received by an IR extender connected to the receiver
unit will be transmitted by this blaster. Place the IR Blaster in direct
line-of-sight of the equipment to be controlled.
7
IR2 EXTENDER: Connect an IR Extender cable for IR signal reception.
Signals received will be transmitted from any IR blaster connected
to the receiver unit. Ensure that the remote being used is within the
direct line-of-sight of the IR Extender.
8
LINK LED: The yellow LED will illuminate when both the source
connected to the transmitter and the display connected to the
receiver are connected. The LED will blink regularly to indicate
that no signal is being received from the display and irregularly to
indicate that an error has occurred.
9
CAT5e/6/7 OUT: Connect to the receiver unit with a single
CAT5e/6/7 cable for transmission of all data signals.
3
RS-232 In
Transmitter
HDMI to CAT5e/6/7 with LAN/IR/RS232
3
Rear
IR1 Blaster
Power
DC 48V
IR2 Extender
4
5
6
7
8
9