Ashly XR-1001 Teknik Notlar & Özellikler
Çapraz Geçiş Ashly XR-1001 için çevrimiçi göz atın veya pdf Teknik Notlar & Özellikler indirin. Ashly XR-1001 2 sayfaları. Electronic crossover
Ayrıca Ashly XR-1001 için: Kullanım Kılavuzu (13 sayfalar), Broşür (1 sayfalar), Kullanım Kılavuzu (16 sayfalar), Kullanım Kılavuzu (8 sayfalar)
Sayfayı Yazdır
XR-1001 Stereo 2-Way/Mono 3-Way Crossover
ARCHITECTS SPECIFICATIONS
XR-1001
The unit shall be a stereo two-way, switchable to
mono 3-way, 24dB per octave electronic cross-
over in a one rack space metal chassis. The unit
shall have separate front panel input level con-
trols on both channels for interfacing with broad
range of nominal system levels. Unity gain opera-
tion must be achievable by setting these controls
at the "U" position. Each of the unit's two channels
shall have independent, infinitely variable adjust-
ment of crossover frequency with controls located
on the front panel. This control shall provide a total
range of 200:1 when used in conjunction with the
unit's adjacent recessed Range switch. There shall
be a Response control calibrated in decibels on
each channel to adjust the damping of that filter
at the crossover point, thus allowing variable sys-
tem response adjustment to specific site require-
ments. The unit shall have separate clip indicators
to monitor all internal amplifiers for any possible
overload conditions. Each channel of the crossover
unit shall have a separate output level control and
mute switch located on the front panel. There shall
be separate inputs and outputs for each channel
on 1/4" TRS phone jacks and XLR connectors, any
of which may be used balanced or unbalanced.
There shall be a 1/4" TRS connector providing for a
summed mono low output. which can be used bal-
anced or unbalanced. The crossover must be cov-
ered under a limited full Five Year warranty. The
shipping weight shall be thirteen pounds, with an
overall depth of eight inches. No other unit shall be
acceptable unless data submitted from an indepen-
dent test laboratory verifies that the above speci-
fications are fully met or exceeded. The crossover
shall be the Ashly model XR-1001.
TECHNICAL NOTES & SPECIFICATIONS
Features
• 5-Year Worry-Free Warranty
• 24dB Per Octave Slopes
• Variable Filter Response
Allows Tuning-In Linkwitz-
Riley or Other Filter
Performances
• Summed Mono Output
• Output Mute Switches
• XLR and 1/4" Inputs and
Outputs
• 20Hz Third Order Hi-Pass
Filter
• Extra Wide Tuning Range
• Peak Overload Warning
Lights
• Tamper-Proof Security Covers
Optionally Available
• Safety/Compliance: cTUVus/CE, RoHS