Ashly ne4800 Kullanım Kılavuzu - Sayfa 13

Bilgisayar Donanımı Ashly ne4800 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Ashly ne4800 20 sayfaları. Network enabled dsp processor
Ayrıca Ashly ne4800 için: Kullanım Kılavuzu (20 sayfalar), Teknik Özellikler (3 sayfalar), Manuel (20 sayfalar)

Sayfayı Yazdır

Operating Manual - ne8800, ne4800, ne4400 DSP Processor

10.6 FR-8 and FR-16 Networked Fader Controller

The FR-8 (shown) and FR-16 (not shown) are eight and

16 channel programmable fader remote control devices which

connect to the NE processor over an Ethernet network . Each

fader can be assigned in Protea

one or more channels . A pushbutton LED switch associated

with each fader shows signal level/clip for audio signals

controlled by that fader and can be assigned mute function or

A/B source select for that fader . The FR-8 and FR-16 devices

can mount to a wall box, panel cutout, or remain freestanding .

Power is from an IEEE 802 .3af Power over Ethernet

(PoE) switch, hub, or in-line PoE injector . A back panel

lockout connection is available to disable all controls using a

key switch .

The FR-8 or FR-16 appears in the Protea

control . Labels can be inserted behind the mylar overlay to properly identify custom programmed fader and button functions .

10.7 neWR-5 Networked Programmable Button Controller

The neWR-5 remote control is a networked version of the WR-

5, using Ethernet instead of the Data Port to communicate with the NE

processor . Connecting and powering the neWR-5 is done using Cat-5

Ethernet cable and an IEEE 802 .3af Power over Ethernet (PoE) switch,

hub, or in-line PoE injector . If PoE is unavailable, the Ashly RPS-18 (sold

separately) is a 15-48VDC power supply capable of at least 2 watts per

neWR-5 and can be hard wired to the back of the neWR-5 . PoE current

draw is 38mA @48VDC and 80mA@15VDC . A decora cover plate

(not included) can be purchased at hardware stores to cover the neWR-5

electrical box and satisfy the aesthetic needs of the installation .

The neWR-5 appears in the Protea

must be assigned to the NE processor under control . The neWR-5 has six

programmable function buttons which can light up green, red, or amber to

display status . Further information on LED status is found in the neWR-5

owner's manual available on the Ashly website . To the right of the function

buttons is a pocket in the mylar overlay for a printed function label

(template available on website) to be inserted . The two other buttons are

used to adjust function parameters such as gain or preset number, and are

indicated by the LED display .

There is also a hard-wired Lock-Out feature on the neWR-5, where the closing of a switch wired to the lockout

Euroblock renders all buttons inactive .

10.8 Ashly Remote App for iPad

A custom and secure touch-screen control surface for the iPad

using the <Ashly Remote> application, available free on iTunes

Controls, labels, and images are combined to manage key processor functions over a wire-

less network connection .

software to control level in

software device network tree and must be assigned to the NE processor under

software device menu tree and

Ashly FR-8 Networked

Programmable Fader Controller

Ashly neWR-5Networked

Programmable Button Controller

can be designed

or via the Ashly website .