Cypress CE217646 Manuel - Sayfa 16
Alıcı Cypress CE217646 için çevrimiçi göz atın veya pdf Manuel indirin. Cypress CE217646 20 sayfaları. Ble wireless power transfer with psoc 6 mcu with ble connectivity
Sayfayı YazdırS w i t c h i n g t h e C P U C o r e s U s a g e
This section describes how to switch between different CPU cores usage (Single core / Dual core) in the BLE PDL examples.
The BLE component has the CPU Core parameter that defines the cores usage. It can take the following values:
▪
Single core (Complete Component on CM0+) – only CM0+ will be used.
▪
Single core (Complete Component on CM4) – only CM4 will be used.
▪
Dual core (Controller on CM0+, Host and Profiles on CM4) – CM0+ and CM4 will be used: CM0+ for the Controller and CM4
for the Host and Profiles.
The BLE example structure allows easy switching between different CPU cores options. Important to remember:
▪
All application host-files must be run on the host core.
▪
The BLE subsystem (BLESS) interrupt must be assigned to the core where the controller runs.
▪
All additional interrupts (SW2, etc.) used in the example must be assigned to the host core.
Steps for switching the CPU Cores usage:
1.
In the BLE customizer General tab, select appropriate CPU core option.
www.cypress.com
BLE Wireless Power Transfer with PSoC 6 MCU with BLE Connectivity
Figure 21. Security Settings
Document No. 002-17646 Rev.**
16