Cypress CE217646 Manuel - Sayfa 9
Alıcı Cypress CE217646 için çevrimiçi göz atın veya pdf Manuel indirin. Cypress CE217646 20 sayfaları. Ble wireless power transfer with psoc 6 mcu with ble connectivity
Sayfayı YazdırThe project demonstrates the core functionality of the BLE Component configured as a PTU.
After a startup, the device performs the BLE Component initialization. In this project, three callback functions are required for
BLE operation. The AppCallBack() callback function is required to receive generic events from the BLE stack and the service-
specific callback WptsCallBack() is required for WPTS service-specific events. The CY_BLE_EVT_STACK_ON event indicates a
successful initialization of the BLE stack. After this event is received, the Component starts scanning. The BLE Component stops
scanning after a 180-second scanning period expires.
On the scanning timeout, the system remains in Hibernate mode. Press the mechanical button SW2 to wake the system and
start re-scanning.
Pin assignments
Table 2
lists the pin assignments and connections required on the development board for supported kits for Wireless Power
Receiver project.
Table 3
lists the pin assignments and connections required on the development board for supported kits for Wireless Power
Transmitter project.
www.cypress.com
Table 2. Pin Assignment for Wireless Power Receiver project
Development Kit
Pin Name
CY8CKIT-062
\UART_DEB:rx\
P5[0]
\UART_DEB:tx\
P5[1]
\UART_DEB:rts\
P5[2]
\UART_DEB:cts\
P5[3]
Disconnect_LED
P0[3]
Advertising_LED
P1[1]
Charging_LED
P11[1]
SW2
P0[4]
Table 3. Pin Assignment for Wireless Power Transmitter project
Development Kit
Pin Name
CY8CKIT-062
\UART_DEB:rx\
P5[0]
\UART_DEB:tx\
P5[1]
\UART_DEB:rts\
P5[2]
\UART_DEB:cts\
P5[3]
Scanning_LED
P0[3]
SW2
P0[4]
Document No. 002-17646 Rev.**
BLE Wireless Power Transfer with PSoC 6 MCU with BLE Connectivity
Comment
The red color of the RGB LED
The green color of the RGB LED
The blue color of the RGB LED
Comment
The red color of the RGB LED
9