Dolphin BC633F Kurulum ve Bakım Kılavuzu - Sayfa 5
Dağıtıcı Dolphin BC633F için çevrimiçi göz atın veya pdf Kurulum ve Bakım Kılavuzu indirin. Dolphin BC633F 18 sayfaları. Electronic foam soap dispenser
Sayfayı Yazdır
PRE INSTALLATION INFORMATION
Dolphin foam soap dispensers, with proper care, will provide long term trouble
free service. Quality liquid soap of recommended viscosity and pH levels are the
main factors for smooth operation of your dispenser. If needed, use a viscometer to
verify the viscosity of your soap to ensure maximum benefit. The recommended
range for foam soap viscosity is up to 100 cPs. Thicker liquid soap flows slower and
inhibits the pump valve, causing strain and damage.
Dolphin foam soap dispensers are suitable for use with any generic liquid soap of
the correct viscosity and pH. The pH level of all soap used in Dolphin foam soap
dispensers should be between 6.5 to 8.5. Lower levels will cause corrosion to the
metal dispenser and even the rubber and plastic components. Higher pH levels will
cause swelling to rubber parts and degradation of plastic components over time.
|
Dolphin
|
5
BC 633F