Dolphin DP1102E Kullanıcı Kılavuzu - Sayfa 4

Dağıtıcı Dolphin DP1102E için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dolphin DP1102E 12 sayfaları. Liquid soap and disinfectant sensor dispenser

Sayfayı Yazdır

Fault/LED signal

Dispenser triggers sporadi-

cally without actuation

Dispenser triggers continu-

ously without actuation

Dispenser triggers unreli-

ably when actuated

Soap leaks out

Cleaning and care

►

Observe the information and regulations on occupational safety and environmental protection

as well as the usage instructions for the cleaning agents used.

►

To avoid damage to the stainless steel surfaces, the following aids and cleaning agents must

NOT be used:

–

Abrasive cleaning powder or abrasive pastes

–

Knifes or scrapers

–

Ferrous scouring sponges, steel brushes or steel wool

–

Chloride-containing products, especially hydrochloric acid and other acidic products

(only exception: vinegar-based cleaning agents)

–

Bleach

–

Silver polish

►

When cleaning the dispenser, observe the information in the table below.

Cause

Interference due to mains

supply line or static charge

Sensor dirty

Heavily soiled dispenser

Module not inserted cor-

rectly in rear panel

Pump jammed

Disposable soap bottle/tank

leaking

Solution

►

Switch to battery operation

►

Check interference in the

power grid and rectify if

necessary

►

Clean sensor window (see

User Guide für Mounting and

Commissioning: Module)

►

Clean dispenser

►

If this does not rectify the

fault: Replace Module

►

Insert Module and pump

properly (see page 24)

►

Check soap pump for ease

of movement and replace if

necessary

►

Replace disposable bottle

with cap or tank