ASI EZFILL10-0390-6-1A-41 Kurulum ve Bakım Kılavuzu - Sayfa 4

Dağıtıcı ASI EZFILL10-0390-6-1A-41 için çevrimiçi göz atın veya pdf Kurulum ve Bakım Kılavuzu indirin. ASI EZFILL10-0390-6-1A-41 16 sayfaları. Soap dispenser

Sayfayı Yazdır

PRE-INSTALLATION INFORMATION

CHECK CONTENTS

Separate all parts from the packaging and check each part with the

PACK CONTENTS section.

Make sure all parts are received and separated before discarding any

packaging material.

If any parts are missing, do not attempt to install the system until you

obtain the missing parts.

IMPORTANT

Ensure there is adequate space and clearance under the vanity to

accommodate the SD Mounting Shank and Basin Nut in the desired

location before drilling the hole in the counter top.

Ensure there is adequate space to place the pump within reach of the

Com Cable from the SD Shank.

Keep in mind that the location of the user hands, while using the faucet

nearby, should not interfere with the soap dispenser sensor detection

area.

CAUTION

Do not install the soap dispensers facing a mirror or any other electronic

system operated by an infrared sensor.

To prevent reflection problems, it is recommended to keep a minimum

distance of 5' (1.5M) between the soap dispenser sensor and any other

directly facing objects.

1408201234 Rev J

05 August 2015