ASI JD MACDONALD 10-20201-2 Kullanım Talimatları ve Parça Kılavuzu - Sayfa 12
Kurutucu ASI JD MACDONALD 10-20201-2 için çevrimiçi göz atın veya pdf Kullanım Talimatları ve Parça Kılavuzu indirin. ASI JD MACDONALD 10-20201-2 15 sayfaları. High-speed hand dryer
Ayrıca ASI JD MACDONALD 10-20201-2 için: Kurulum (2 sayfalar)
Sayfayı Yazdır
Hand Dryer
Chamber Replacement-
Start with steps fig's 1-3. Remove blower housing' upper (Item 9)
see step fig. 4 under motor replacement.
Screw M3 x 10
Retain and Reuse
Item # 47 x 2
Conversion from power cord (as supplied) to in-wall power supply (by others)-
See also installation guide 1203270822.
Start with steps fig's 1-3. Make sure power is OFF before starting.
Remove power cord (item # 60) from terminal block and strain relief using C-socket wrench. Provide power
supply (by others) in appropriate voltage for model selected at location per diagram in detail A (pg 2 this
manual) and step 5.b. (pg 3 this manual). Feed power cord into cord-grip strain relief (item # 36) and follow
step 6.a. Connections A-C (pg 3 this manual). Insertion of 16AWG ~ 14AWG stranded wires into terminal
block (item # 35) receptacles will be easier and provide better results if crimp-on wire tips (item # 64) are
installed on wire ends prior to feeding cable through cord-grip (item # 36). If solid wire power cable is
provided, tips are not required.
2-17/64
"
(57.5)
Datum
Outline
of
Mounting
Housing
Wall Plate
STUB
In-wall
Power cable
(by others)
Operating Instructions and Parts Manual
Surface-mounted High-Speed hand dryer
(Item 18)
3/16
"
(5)
Wall
Power
Location
1-29/64
"
(37)
2
Crimp-on tip
Item # 64
N-Chamber
Item # 18
STUB
2-1/2
"
In-wall
(64)
Power cable
(by others)
1
Cable prep
Wire
(Stranded)
12
A S I J D M a c D o n a l d P t y. L t d .
www.asijdmacdonald.com.au
1800 023 441
C-Wrench to loosen/
tighten (item 36)
L-Wrench
or
screwdriver
www.asijdmacdonald.com.au