Cypress Semiconductor CYUSBS232 Hızlı Başlangıç Kılavuzu

Mikrodenetleyiciler Cypress Semiconductor CYUSBS232 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Cypress Semiconductor CYUSBS232 2 sayfaları. Usb-uart reference design kit

Sayfayı Yazdır

USB-UART REFERENCE DESIGN KIT

Kit Based on USB-UART LP Bridge – CY7C65213

Step 1: Software Installation

• Download and Unzip the ISO file from

www.cypress.com/go/CYUSBS232

• Run cyautorun.exe and follow the steps in the

installer window

• Install Tera Term from the following location:

<install directory>/Cypress/CYUSBS232 RDK/

1.0/teraterm

Step 3: Enumeration

• Device will appear as a USB Serial Port (COM#)

in the Device Manager (For example, in Win 7,

click Start > Control Panel > Device Manager)

Kit operation: Data is transmitted from USB to UART (TXD). The TXD-RXD loop back connection enables the data

to be fed back to the UART (RXD) to USB and is displayed on the Tera Term window

Notes:

Connect the board to PC only after software installation. For the latest software updates and MAC/

LINUX/Android users visit

** Each character will appear twice – "HHEELLLLOO WWOORRLLDD"

CYUSBS232 QUICK START GUIDE

Step 2: Powering the board*

• Connect the board to the PC using the USB cable

• LED D1 (as shown in next page) glows to

Step 4: Testing basic UART functionality

• Connect TXD to RXD with the "Jumper wire",

• Run Tera Term (Start > All Programs > Tera Term)

• In "Tera Term: New Connection" window, click

• Enable local echo option (go to Setup > Terminal

• Type "HELLO WORLD". Text will appear

www.cypress.com/go/usbserial

indicate the board is powered

refer picture in next page

Serial and select Port (COM#), click OK

and check the local echo box)

on the same terminal **