Cypress Semiconductor MiniProg3 Kullanıcı Kılavuzu - Sayfa 16

Anakart Cypress Semiconductor MiniProg3 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Cypress Semiconductor MiniProg3 20 sayfaları.

Technical Description

3.1

Interfaces

3.1.1

In-System Serial Programming (ISSP) is a Cypress legacy interface used to program the PSoC 1

family of microcontrollers. MiniProg3 supports programming PSoC 1 devices through the 5-pin

connector only.

For more information about the ISSP interface, see the PSoC 1 Technical Reference Manual.

3.1.2

The Joint Test Action Group (JTAG) standard interface is supported by many high-end

microcontrollers, including the PSoC 3 and PSoC 5LP families. This interface allows a daisy chain

bus of multiple JTAG devices. The MiniProg3 supports programming and debugging the PSoC 3 and

PSoC 5LP devices using JTAG, through the 10-pin connector only.

3.1.3

Recent ARM-based devices have introduced a new serial debugging standard called Serial Wire

CY8CKIT-002 MiniProg3 User Guide, Doc. # 001-59350 Rev. *E