Cyracom ClearLink Cordless Kullanıcı Kılavuzu - Sayfa 15

Telefon Cyracom ClearLink Cordless için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Cyracom ClearLink Cordless 17 sayfaları.

to operate the equipment.

To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that

can be safely absorbed by a user or bystander according to the intended usage of the product. This prod-

uct has been tested and found to comply with the FCC criteria. The handset may be safely held againstthe

ear of the user. The base unit shall be installed and used such that parts of the user's body other than

the hands are maintained at a distance of approximately 20 cm (8 inches) or more. If you choose to use a

clipping device, please make sure to only use the supplied belt clip.

Warning: Changes or modiﬁ cations to this unit not expressly approved by the party responsible for com-

pliance could void the user authority to operate the equipment.

SAR

1. The equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environ-

ment, under 47 CFR 2.1093 paragraph (d)(2).

2. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmit-

ter

The 2.4 GHz EDCT CORDLESS PHONE has been tested to the FCC exposure requirements (Speciﬁ c Absorb-

tion Rate).

FCC Part 68 and ACTA

This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the

Administrative Council for Terminal Attachments (ACTA). The label on the back or bottom of this

equipment contains, among other things, a product identiﬁ er in the format US:AAAEQ##TXXXX. This

identiﬁ er must be provided to your local telephone company upon request.

The plug and jack used to connect this equipment to premises wiring and the telephone network must

comply with applicable Part 68 rules and technical requirements adopted by ACTA. A compliant telephone

cord and modular plug is provided with this product. It is designed to be connected to a compatible modu-

lar jack that is also compliant. An RJ11 jack should normally be used for connecting to a single line and an

RJ14 jack for two lines. See Installation Instructions in the user's manual.

The Ringer Equivalence Number (REN) is used to determine how many devices you may connect to your

telephone line and still have them ring when you are called. The REN for this product is

encoded as the 6th and 7th characters following the US: in the product identiﬁ er (e.g., if ## is 03, the

REN is 0.3). In most, but not all areas, the sum of all RENs should be ﬁ ve (5.0) or less. For more

information, please contact your local telephone company.

This equipment may not be used with Party Lines. If you have specially wired alarm dialing equipment

connected to your telephone line, ensure the connection of this equipment does not disable your alarm

equipment. If you have questions about what will disable alarm equipment, consult your telephone com-

pany or a qualiﬁ ed installer.

If this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has

ClearLink

™

Cordless User Guide