1010music Synthbox Hızlı Başlangıç Kılavuzu - Sayfa 2
Sentezleyici 1010music Synthbox için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. 1010music Synthbox 2 sayfaları.
Ayrıca 1010music Synthbox için: Hızlı Başlangıç Kılavuzu (2 sayfalar)
Sayfayı Yazdır
Configure the Wavetables and Oscillator
Press the Home button until you are back to the
1.
On the Touch Screen, touch the element you want to control to display the
2.
Parameters
1, the bottom waveform for Wavetable 2, or the
waveforms on the left for the Oscillator.
Adjust a parameter by turning the Control Knob next to it.
3.
4. The parameters that can be modulated have three black boxes under the
parameter setting, allowing you to configure three different sources to
modulate that parameter. For example, in the screenshot on the right,
configured as a modulator for
WPos
. We'll discuss modulators later.
Apply Effects
Press the Home button until you are back to the
1.
2.
Touch the name of the effect you want to control to display the
screen for that element:
DLY
for delay.
Adjust a parameter by turning the Control Knob next to it. Note that some
3.
effects parameters also have three black boxes under them that allow you to
configure modulation of the parameter.
Apply ENV and LFO Modulation
Synthbox allows you to modulate the waveforms, oscillator and effects via envelopes, low frequency oscillators,
sequencers, and control voltage inputs. The method of applying modulation to each of these elements is the
same, so we will use a wavetable as an example.
Main
1.
From the
Parameters
2.
Touch a black box under a parameter (e.g. the
wavetable) to display the
Use the Control Knobs to adjust the modulation
3.
start with, choose
4. Press the Home button twice to go back to the
Main
5. From the
LFO1
. Use the Control Knobs to adjust the
Press the Info button to see page 2 of the
Info button again to go back to page 1.
Note:
You can use these same steps to apply
•
ENV1
modulation is always applied to the voltage control amplifier for the voice. You can edit
•
ENV1
the
To Use CV Modulation:
Plug a CV Modulator into the rightmost column of the bottom row of CV Input Jacks.
1.
Main
2.
From the
3.
Touch a black box under the
CV Input in the
Learn More
Learn about more features of synthbox such as Sequencer Modulation by downloading the Synthbox User Manual
or watching Synthbox Videos on our website at http://1010music.com/support-2.
Join the conversation with other synthbox owners at https://forum.1010music.com.
9/7/17 12:20 PM
screen for that element. Touch the top waveform for Wavetable
Pitch
, and
FILT
for a filter,
screen, touch the element you want to modulate (e.g. Wavetable 1) to display the
screen for that element.
Modulation Selection
LFO1
50%
and
for audible results.
LFO1
screen, touch
to display the
parameters the same way as you edit the
screen, touch the top waveform to display the
Pitch
parameter to add a modulator. Choose
EXT3
jack will now control the modulation of the
Digital Heart – Analog Soul
Main
screen.
OSC
button just below the
LFO1
EXT1
and
are modulating
Main
screen.
FLDS
for flanger and distortion and
WPos
parameter for a
screen.
Source
and
Main
screen.
Parameters
LFO1
parameters as desired.
LFO1
parameters screen. Press the
ENV2
LFO2
and
LFO
Wavetable Parameters
LFO2
is
Parameters
Parameters
FILT Parameters
Amount
. To
screen for
Selection
modulation.
ENV2
and
parameters.
EXT3
for the
Pitch
parameter.
Copyright 1010music 2017
Wavetable
Screen
Screen
Modulation
Screen
screen.
Source
. The