Cyrus CM 8 SOLID Kullanıcı Kılavuzu - Sayfa 11
Cep Telefonu Cyrus CM 8 SOLID için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Cyrus CM 8 SOLID 13 sayfaları.
Sayfayı Yazdır4. The function menu
» Call waiting
If you are called while you are already on the phone, you will
hear a soft knocking sound. You can now switch between the
already started and waiting call.
» Call barring
Here you can select which calls may not be made or accepted
(all incoming calls, incoming roaming calls, international calls,
etc.).
» Caller ID
Set whether your phone number is displayed or suppressed
during calls.
» Others
– IP prefix: IP number adjustable
– Gesprächszeiterinnerung (Minuten): Wählen Sie aus den
Vorlagen, oder konfigurieren Sie selbst eine Zeit als
Erinnerungsintervall während eines Telefonats.
– Talk time reminder (minutes): Choose from the templates or
configure your own time interval reminders during a call.
– Automatic redial: with this function activated, your mobile
phone starts a new connection attempt as soon as the desired
caller is available again.
– Vibration when connected: By activating this function, you
can recognize that you are connected to the desired caller
by a short vibration of the mobile phone.
– Automatically record voice calls: When this function is
activated, the call is automatically recorded.
N o t e :
The above function requires network support. If you want
to use this function, contact the network operator
4.4.2 Phone Settings
» Date and time
Here you can set and format the date and time.
» Language settings
You can select the language of the phone.
» Shortcut Settings
Enter shortcuts for key functions.
» Automatic Power On/Off
You can select a time at which your phone is automatically
turned on or off.
» Energy management
Check the battery capacity.
» Restore settings
Reset your phone to factory settings. The password can also
be restored.
4.4.3 Display
Turning display on/off
You can make various settings
regarding the display.
Wallpaper Settings
You can set different background
images.
Settings for the display in idle mode:
Contrast
You can adjust the brightness of
the backlight for the screen.
Keyboard background
illumination time
You can set different backlighting
times for the keyboard.
Automatic key lock
You can specify the period of time
after which the automatic key lock
is to be activated.
11
4.4.4 Safety
» PIN
You can set, change, or disable the PIN code. To create,
remove or change the PIN, the current correct PIN must be
entered. If you have set the PIN, you must enter this PIN
each time you open the phone. If you enter the wrong PIN
three times the SIM card will be blocked. To unlock you
need the PUK1 code. If you have misplaced your PUK1code
or need a new one, please contact your network operator.
The default PIN number is 1234.
» PIN2-Code
You can change the PIN2 code. For further information,
please contact the network operator.
» Locking the phone
You can assign or change a password. If you create a password,
you must enter it each time you reboot your phone.
» Privacy
You can set a password to protect your phone from third-party
access in standby mode. This password must always be entered
when you want to use your mobile phone.
» Lock screen with End key
Set the red handset button as a button to lock and wake up the
phone.
» Blacklist
Add the number you want to block to this list. Select whether to
block all calls and text messages of this number.
4.4.5 Profiles
The term scene mode describes the following audio profiles: Nor-
mal, mute, meeting, inside and outside.
Rename
Here you can rename the profile.
Set ringtone
You can set the ringtone.