Cyrus CD XT SE2 Kullanıcı Talimatları - Sayfa 8
CD Çalar Cyrus CD XT SE2 için çevrimiçi göz atın veya pdf Kullanıcı Talimatları indirin. Cyrus CD XT SE2 13 sayfaları.
Sayfayı Yazdır
- 1. IMPORTANT! Read before Operating this Equipment
- 2. Power Supply
- 3. Product Service Centres
- 4. Preparations for Installation
- 5. Installation
- 6. Connecting to the Ac Mains Supply
- 7. Connecting to the System Amplifier
- 8. Operation
- 9. Front Panel Display
- 10. Program Memory Storage
- 11. Loading a Disc
- 12. Playing a Disc
- 13. Troubleshooting Guide
- 14. Specifications
- 15. Warranty
- 16. Laser Product
Cyrus CD 6
CD 8
SE
2,
OPERATION WITH THE AVRS7.2 REMOTE CONTROL
The CD 8
is supplied with the Cyrus AVRS7.2 remote control which will
SE
2
control Cyrus amplifiers, DVD players, tuners and surround sound decoders
in addition to the CD8
.
SE
2
AVRS7.2 System select keys
System select keys
Commands may be sent to different Cyrus system components by selecting
the appropriate system select key on the handset. These keys are marked
CD, TU/DAB, AV, AV-S and SETUP. The CD, TU/DAB, AV, AV-S keys will
flash when any command is transmitted to show which type of product is
under control. Commands to a Surround Decoder from the SETUP system
will flash the AV-S indicator.
•
Pressing CD will send commands to a Cyrus CD player. This key will
also switch on an amplifier and select the CD input.
•
Pressing TU/DAB will send commands to DAB radios or FM Tuners.
This key will also switch on a DAB radio or FM Tuner and select the TU
input of an amplifier. To change between DAB or FM operation, hold
down the TU/DAB key for 3 seconds until the light changes colour. The
key will light green when set for DAB commands or red when set for FM
tuner commands. NOTE:- The FM band of a DAB radio is not selected
in this way, the BAND key is used for this purpose.
•
Pressing AV will send commands to a DVD player. This key will also
switch on a DVD player and select the AV input of an amplifier.
The amplifier will respond to the volume, balance, mute and input keys when
any of the above systems are selected.
NOTE - The AV-S and SETUP keys are not used to control a stereo system.
Multi-channel Surround Sound Systems
The AV-S and SETUP keys of the AVRS7.2 will control a Cyrus surround
decoder. If you own a Cyrus decoder which was not originally supplied with
an AVRS7.2 remote control, a full copy of the AVRS7.2 instruction sheet is
available on the Cyrus website www.cyrusaudio.com.
CD8
Additional Remote Control Functions
SE
2
The following additional functions of the CD 8
AVRS7.2 remote control -
Direct Access Numeric Keypad
Press any numeric key on the handset. The track number will appear on the
display and the CD 8
will scan and play the selected track. If the disc has
SE
2
more than ten tracks the CD 8
when appropriate.
When a program is stored, the keypad will enable access only to tracks
included in the program memory.
Display Control
Press the DISPLAY OFF key on the handset to switch the display of the CD 8
off. Pressing this key again restores the display to its normal mode.
SE
2
Switching the display off stops the digital traffic required to update it and
reduces the load on the power supply. This improves the overall quality of the
sound without adversely affecting the normal functions of your CD 8
Phase Control
Absolute phase is determined by the audio system and the recording process.
Changes in absolute phase are subtle and are best established from the
listening position. The absolute phase of the audio signal can be changed
from the remote control using the PHASE INVERT key. The display text area
will show the message 'Phase Normal' or 'Phase Invert'.
The performance of the CD 8
SE
or phase inverted mode.
Time Display Selection (Refer to Fig 3)
The DISPLAY MODE key features selection of two time display modes.
Mode 1
Elapsed time display
elapsed from the beginning of the current track.
Mode 2
Remaining time display
time remaining to the end of the disc.
CD XT
CD
SE
SE
2,
2,
are available via the
SE
2
will briefly wait for entry of a second digit
SE
2
is unaffected whether the signal is in normal
2
c
. The time display will read the time
d
with minus sign. The time display reads
T TRANSPORT
Full Remote Command Listing
A full listing of the command set available from the AVRS7.2 is listed in the
table on the next page.
b
d
h
i
1$
1%
1^
1*
1(
2)
2@
2$
2%
.
SE
2
5
User Instructions
OFF
CD
TU/DAB
AV
AV-S
AMPLIFIER
DVD
IN
ZOOM
NIGHT
ANGLE
DSP
OK
ADJ-
ADJ+
DISP
1
2
3
5
4
6
7
8
9
0
T-C
SETUP
MENU
BASS
TREBLE
AV
MODE
LIPSYNC NOISE
SETUP
a
c
e
f
g
1)
1!
1@
1#
1&
2!
2#
2^
2&