Cyrus dAD1 Kullanıcı Talimatları - Sayfa 10
CD Çalar Cyrus dAD1 için çevrimiçi göz atın veya pdf Kullanıcı Talimatları indirin. Cyrus dAD1 13 sayfaları.
Sayfayı YazdırCyrus dAD1
OPERATING THE dAD1 WITH THE COMMANDER
The Cyrus Audio Commander enables integrated system
operation of Cyrus components including the dAD1.
The handset also provides operating features not found on
the standard remote handset.
1.
CD Select
2.
System On
3.
System Standby
4.
Pause
5.
Play
6.
Stop/Open
7.
Next/Previous Track
8.
Search Fwd./Rev.
9.
Memory Store
10. Number Keypad
11. Repeat
12. Time Display
13. Display
9
THE CYRUS AUDIO COMMANDER
SWITCHING ON/OFF
From Standby, press the CD SELECT key b to select the
dAD1 and bring the system amplifier/s out of Standby.
Alternatively: Press the SYSTEM ON key c to bring the
Cyrus Pre or Cyrus IIIi/III out of Standby. Now press the
CD SELECT key b to select the dAD1 and activate it.
Pressing the SYSTEM STANDBY key d will set any
Cyrus amplifier, tuner or CD player to Standby.
REMOTE OPERATION –ADDITIONAL FEATURES
Search: Forward and Reverse Search are engaged by
pressing the
and
Time Display key 1@. This changes the display between:
Elapsed Time (
from the beginning of the current track, and Remaining
Time (
), which is the time remaining to the
end of the disc or a program, if stored.
Display key 1#. This key switches the display on/off.
Direct Access Numeric Keypad: Press any number key
1) to select and play a track. The track number will appear
on the display. If the disc has more than ten tracks the
dAD1 will briefly wait for a second digit if appropriate.
When a program is stored, the keypad will enable access
only to tracks included in the program memory.
keys i.
), which is the time elapsed
English