ASIX MCS9865 Kullanıcı Kılavuzu - Sayfa 4

Kontrolör ASIX MCS9865 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. ASIX MCS9865 9 sayfaları. Dos configuration tool

1. Introduction

This document provides the information about how to install the serial and parallel ports for

MCS9865 PCI to Serial and Parallel I/O ports on DOS 6.22 environment. Normally any serial and

parallel I/O ports can be supported by BIOS call services in DOS environment. However DOS

supports only 4 serial ports (3F8h, 2F8h, 3E8h, 2E8h) and 3 parallel ports (3BCh/378h/278h).

File Name

GEMDOSIN.EXE

GMCONFIG.CFG

Usage : GemDosIn [<options>]

By default, GemDosIn displays COM/LPT ports.

Options

-a[dd] = Add Gemini Ports

-c[onfig]:<parameters> = Configure Gemini Ports

-d[elete] = Delete Gemini Ports

-r[emap] = Remap Gemini ports to legacy ports

-f[ile] = Remap Gemini ports to legacy(Custom IO-Base) ports

-s[ilent] = Silent mode

-u[nused] = remap to all Unused legacy port i/o base, without consideration of COM/LPT

number

-t[est] = Test ports

Config Option Parameters

-c[onfig]:lpt[1|2|3]=[spp|bpp|ppf|epp|ecp]

e.g., -config:lpt=spp would set all LPT ports to SPP

e.g., -c:lpt1=spp would set lpt1 to SPP

e.g., -c:lpt1=spp,lpt2=bpp would set lpt1 to SPP and lpt2=BPP

Description

MCS9865 DOS Configuration Tool

MCS9865 Serial/Parallel Ports Configuration Data File

MCS9865 DOS Configuration Tool

User Guide