Cytech KP04 Kurulum Kılavuzu - Sayfa 5
Tuş takımı Cytech KP04 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Cytech KP04 20 sayfaları. Lcd keypad
Ayrıca Cytech KP04 için: Hızlı Başlangıç Kılavuzu (4 sayfalar)
Sayfayı YazdırKP04 LCD Keypad Installation Manual
Introduction
The KP04 Keypad incorporates a 2 lines x 16 character Liquid Crystal Display
(LCD), enabling Comfort messages to be displayed. This allows users to see
alarms, zones and warning messages without the need to sign-in to listen to
the voice menu. The KP04, like a KP01/02 keypad also has a comprehensive
voice menu. A key difference between KP04 and non-LCD versions is that
the Event Log is displayed as well as announced. The words in the LCD
keypad can also be customised according to the wordlist and vocabulary in
Comfort using the VoiceProc Software. The KP04 Keypad also receives
Infrared codes from the RC01 handheld remote control or a universal
remote control such as the Philips Pronto®, allowing responses to be
activated to control home appliances or act as a hand-held keypad in the
same way as the KP02. A feature of the KP04 is its real time display of
active zones and alarms. Hence a trouble alarm like "Phone Trouble" will be
displayed on the LCD. For Communications Failures, the name of the device
will be displayed e.g. "UCM 2", "Keypad 3", "Door Station 1", Slave 1"
instead of the more cryptic Communications Failure ID number.
Note that from Comfort II firmware version 5.039 onwards, the
Event Log will be both displayed and read out from the KP04.
Upgrading from KP01 and KP02
The KP04 can replace KP01s and KP02s in existing installations. Mounting
holes are identical to the KP01/KP02, and the same wiring from Comfort to
1