BlueParrott S450-XT Kullanıcı Kılavuzu - Sayfa 10

Kulaklıklar BlueParrott S450-XT için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. BlueParrott S450-XT 16 sayfaları.

ADVANCED BLUETOOTH

FEATURES AND FUNCTIONS

Multiple Device Pairing and Multipoint Mode

The S450-XT has pairing memory for up to 8 devices. The headset can also use Multipoint Mode, which

means that it can be connected to two Bluetooth devices at the same time.

Using the S450-XT in Multipoint Mode

1. To use the S450-XT in Multipoint Mode, first make sure the headset is paired with both your devices.

2. With both devices in range and with their Bluetooth enabled, power on the S450-XT.

3. As each Bluetooth device connects to the S450-XT, you will hear the voice prompt, "Your headset is

connected."

The S450-XT will monitor both phones and enable you to answer a call on either one from the headset.

If you are on a call and the other device receives a call, you will hear a notification in the headset.

To redial the last number that was dialed from the cell phone, press and hold the Volume Down button for

approximately 1 second. A beep will be heard and the phone will redial the last number.

If you are on an active call and a second call comes in, you will hear a low tone notification in the

headset. If supported by your phone, you have the following options:

• To accept the incoming call and end the active call, press the MFB once to end the active call, and

then once again to answer the incoming call.

• To accept the incoming call and place the active call on hold, quickly press the MFB twice.

• To reject the incoming call, press and hold the MFB for 1-2 seconds.

VXi BlueParrott

S450-XT User Guide

PAGE 10