BlueParrott VXi Reveal Hızlı Başlangıç Kılavuzu - Sayfa 2
Kulaklıklar BlueParrott VXi Reveal için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. BlueParrott VXi Reveal 6 sayfaları.
Sayfayı Yazdır
VXi Reveal™/Xplorer™ Quick‐Start Guide
Wearing and Adjusting the Reveal
To get the best performance from our noise‐canceling technology, angle the microphone boom towards the corner of your mouth.
Positioning is important; small adjustments in microphone placement can improve performance.
The headset can be worn on either ear, with or without the ear hook.
Choose the ear bud that best fits your ear. To adjust the fit, rotate the ear bud so that the stabilizer loop (if applicable) presses
against the back curve of your ear.
Using the Headset in High‐Noise Situations
The microphone boom is extendable for greater levels of noise cancelation in noisy environments. Simply slide the boom in or out as
needed.
Charging
Connect charger cord to the headset's USB charging port. The headset indicator lights will illuminate red when charging and blue
when fully charged.
Turning Headset On/Off
Slide the switch to turn the headset on or off.
One‐Touch Pairing (NFC)
1)
Confirm that your cell phone is NFC‐capable.
2)
Make sure that NFC is enabled on your cell phone.
3)
Turn the headset on.
4) Place the NFC zone of your cell phone against the NFC zone of the headset and hold together while your cell phone
registers the headset.
5) Follow the prompts on your cell phone until it confirms pairing is successful.
NFC Zone on headset (back of unit, just below earpiece receiver)
2