EG4 EG4-LL Kullanıcı Kılavuzu - Sayfa 17

Pil Paketi EG4 EG4-LL için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. EG4 EG4-LL 20 sayfaları. Rack mounted 48v 100ah/24v 200ah

Battery Storage

How do you properly store your battery?

If you plan to store your batteries, there are a few steps you can take to ensure that they are stored safely

and in a state that will ensure they are not damaged while storing them. These include a few factors as

detailed below.

Battery State

The state of the battery when placed into storage will affect how long it can be stored for as well as the

condition when you begin using it again. EG4 recommends that each battery is brought to a SOC (state of

charge) of 100% prior to placing it in storage. Lithium iron phosphate batteries will lose a certain

percentage of their total charge while in storage, depending on how long they are stored and the

conditions they are stored in. Our recommendation is to ensure they are fully charged to allow them to be

stored as safely and for as long as possible.

Environmental Factors

The environment you store your EG4 battery in can greatly affect the health of the battery. The

temperature should remain moderate. We also suggest keeping the battery away from locations where it

may get wet, or locations with extremely high humidity.

What steps should you take to maintain a healthy battery?

EG4 batteries are an advanced lithium iron phosphate battery. This means that in reality, they require very

little maintenance. If used correctly by following this manual, we have designed these to be 'set it and

forget it' for most of their lifespan. We do recommend connecting to the batteries periodically using the

monitoring software to ensure there aren't any irregularities, and if you are placing the batteries in series

without a bus-bar, to ensure you fully charge your batteries periodically. Beyond that, after initial set up

you shouldn't need to do much with your batteries at all.