Ega Master 57666 Kullanım Talimatları Kılavuzu - Sayfa 7
Ölçüm Cihazları Ega Master 57666 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Ega Master 57666 18 sayfaları. Máquina de calibración de par
Sayfayı Yazdır
- Use only and exclusively for the use foreseen in this manual.
- Do not violate the safety of the machine. If there is a fault, have it repaired.
- Avoid areas of possible entrapment.
- Do not overload the machine.
- Check the state of conservation of the machine and any strange operations.
- Follow the procedures described in this manual.
- Use the test bench only for the designed task.
- MONITOR THE STATE of conservation and the possible defects that it may have.
- DO NOT overstress the machine.
INSTALLATION CONDITIONS AND ENERGY SOURCES
The machine must be placed on a wide table with sufficient resistance, in a dry and well-
lit environment such as an office. The height of the table is important for the ergonomics of the
operator.
ELECTRIC POWER
Only for powering the sensors:
- Single-phase 230VAC on a common Schuko male plug always using its transformer
supplied with the set.
MECHANICAL ENERGY
- Manual mechanical energy supplied by the user by means of a crank.
- Designed to work in an indoor environment (not humid).
- Machine designed for a temperature of use between 5 °C and + 35 °C.
READ THIS MANUAL CAREFULLY
BEFORE USING THE PRODUCT
GENERAL RULES OF USE
ENGLISH
7