Ega Master 66266 Kullanım Talimatları Kılavuzu - Sayfa 6
Ölçüm Cihazları Ega Master 66266 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Ega Master 66266 18 sayfaları. Outer digital micrometer
Sayfayı Yazdır
ENGLISH
Please read the product instruction carefully and use the product correctly under the instruction
1.
Button: Short press to turn on, is absolute measurement mode. Long press to reset initial
value
2. In/mm button: Short press to switch between inch and metric.
3. DATAdata transmission button; if the product does not have bluetooth function, after
connecting the data box, short press can transmit data to the receiving end.
4. Quick moving shaft
5. Fine adjustment with constant force: Rotate fine adjustment with constant force to ensure
measurement accuracy.
6. LCD Screen: display measurement value.
7. Output connector:SPC data output(the bluetooth form can be used for power supply).
8. Locking wrench: lock the position clockwise and release the lock anticlockwise
9. Measuring rod
Before use, please make sure that the battery is installed
1. Loosen the lock wrench of the micrometer counter clockwise to release the lock.
2. Turn on to check if the micrometer display screen and key functions are normal or not.
3. Clean the external measuring surface of the measuring tool with a clean soft cloth, and adjust
the quick moving shaft to the initial position with appropriate force (the products over 25 mm
need to use the standard bar). After the adjustment, press the
value, and the micrometer can be used normally after calibration.
6
1. PRODUCT FIGURE AND BUTTONS
2. USE STEPS
key to return to the initial