BLUEREV CANADIAN Kullanıcı Kılavuzu - Sayfa 6

Bisiklet BLUEREV CANADIAN için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. BLUEREV CANADIAN 16 sayfaları.

USING THE BIKE

How the Bike works

Your new E-Bike has an internal controller that provides variable power to the motor(s) using 2 sensors for the Pedal Assist mode.

There is also a Twist Throttle Grip on the handlebars for pedal free riding.

Throttle:

The handlebar twist throttle mechanism allows partial or full motor power to be activated. Unfamiliarized users should be

more cautious when first pushing the throttle. The throttle function is deactivated when the pedal assist level is set to "0".

Pedal Assist (Cadence Sensor):

Pedal Assist (Torque Sensor):

Maintenance

It is important to perform proper maintenance and often fine-tune your bike to ensure optimal performance and safe riding.

Regularly lubricate your chain, gear shifter, sprocket, and all moving parts. Always check the condition of your bike before riding

and make sure that it is well maintained. When in doubt, consult a bicycle mechanic for assistance!

Warning:

If you do not have the experience, skill, or tools to complete maintenance or adjustment of your bike, it is highly

recommended to have a bicycle mechanic check your bike and ensure it is safe to ride.

Liability Disclaimer

There are risks associated with the use of any bike over time which cannot be predicted or avoided and are the sole

responsibility of the rider. You are responsible for your own actions while using an electric bike.

Bluerev is not responsible nor liable for any accidents or injuries (whether caused by you or others) that may occur

during your use.

We recommend contacting your insurance provider to determine if your current insurance policy

would cover you in the event of an accident.

The cadence sensor activates the motor when the crank is in motion and provides

appropriate power to the motor.

The torque sensor activates the motor when pressure is applied to the pedals. Variable

power will be applied to the motor depending on the amount of pressure being put on the

pedals.

U S E R M A N U A L