Asko D1996SS Planlama ve Tasarım Kılavuzu - Sayfa 9

Bulaşık Makinesi Asko D1996SS için çevrimiçi göz atın veya pdf Planlama ve Tasarım Kılavuzu indirin. Asko D1996SS 15 sayfaları. Standard dishwashers
Ayrıca Asko D1996SS için: Kullanım ve Bakım Kılavuzu (12 sayfalar), Kurulum ve Özelleştirme (4 sayfalar), Planlama ve Tasarım Kılavuzu (19 sayfalar), Kullanım ve Bakım Kılavuzu (12 sayfalar)

D1796FI AND D1996FI CUSTOM PANEL INSTALLATION OPTIONS

4-INCH TOE KICK INSTALLATIONS

Custom panels the same height as the

dishwasher door

If the custom panel is the same height as the dishwasher door, a 2"

decorative fill strip or pull-out cutting board must be used to fill the

area between the panel and the counter top (as illustrated below).

2" decorative fill strip or cutting board

597 mm

4-inch toe kick

Custom panels that extend to cabinet top

Another installation option for a 4" toe kick is to extend the

custom panel to the cabinet top (as illustrated below), which

eliminates the need for a decorative fill strip. A one-piece custom

door panel with a curved handle is available for 4-inch toe kick

installations (see page 12).

Panel extends from toe kick to cabinet top.

23-1/2"

597 mm

4-inch toe kick

NOTE: If the cutout is 24" wide, the custom panel can be

23-3/4" wide.

Specifications are subject to change without notice. See installation instructions for additional details.

23-1/2"

ASKO D

With a 4-inch toe kick installation, the

door panel extends 2 inches above the

control panel, as illustrated.

If you install the door panel to reach the cabinet top, we

recommend that you install a 2" support strip between the upper

edge of the dishwasher and the counter to hide the top of the

dishwasher and further reduce water noise. A metal fill strip is

also available for this type of installation (see page 12).

2-inch support strip

4-inch toe kick

6-INCH TOE KICK INSTALLATIONS

For 6" toe kick installations, no decorative fill strips or support

strips are necessary.

Panel extends from toe kick to cabinet top.

ISHWASHER

1-3/4"

(44 mm)