Bluerock Tools MWS-808PMO Servis Kılavuzu - Sayfa 10
Araçlar Bluerock Tools MWS-808PMO için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Bluerock Tools MWS-808PMO 10 sayfaları. Wire strippers
Ayrıca Bluerock Tools MWS-808PMO için: Servis Kılavuzu (6 sayfalar)
Sayfayı Yazdır21. Use a 14mm wrench to loosen the locknuts and blade alignment bolts on each side of the
machine as shown. Note: This is only necessary if the blades and cutting channels are
misaligned.
22. Move the top roller so the blades are centered in the cutting channels.
23. Tighten each of the alignment bolts only until they touch the roller housings.
24. Back each bolt out a half turn to allow room for movement and then tighten each locknut.
Blade Alignment Adjustment