d&b audiotechnik xS Series Manuel - Sayfa 9

Konuşmacılar d&b audiotechnik xS Series için çevrimiçi göz atın veya pdf Manuel indirin. d&b audiotechnik xS Series 13 sayfaları.
Ayrıca d&b audiotechnik xS Series için: Manuel (12 sayfalar)

Sayfayı Yazdır

d&b 44S Manual 1.1 en

Altering the HF horn dispersion

Depending on the application (horizontal or vertical setup of the

cabinet), the HF horn can be rotated through 90°.

To rotate the HF horn, proceed as follows:

Tools required:

▪ Allen hex torque wrench 2.5 mm.

1. Place the cabinet on its back panel.

2. Depending on the cabinet variant, first undo the four Allen hex

screws holding the front grill and remove the front grill.

3. Undo the four Allen hex screws of the HF horn.

4. Carefully pull out the HF horn and turn it clockwise by 90°.

5. Refit the horn as follows:

1. Make sure the gasket [G] is seated properly.

2. Refit the horn and tighten the screws with a maximum

torque of 2 N×m.

6. Recheck your work and refit the front grill.