d&b audiotechnik B1-SUB Manuel - Sayfa 4
Subwoofer d&b audiotechnik B1-SUB için çevrimiçi göz atın veya pdf Manuel indirin. d&b audiotechnik B1-SUB 6 sayfaları.
Sayfayı Yazdır
CAUTION!
1
n.c.
2
3
4
Sense Drive
5
Connector wiring
INPUT A
AMP A
INPUT B
AMP B
D12 Input/Output routing Dual channel
mode
B1-SUB Manual
The B1-SUB is an actively driven subwoofer which uses a pair of
15" LF drivers mounted in a bass-reflex cabinet.
The B1-SUB cabinet is constructed from marine plywood and has
an impact resistant paint finish. The front of the loudspeaker
cabinet is fitted with a rigid metal grill covered with a replaceable
acoustically transparent foam, and fitted with catches to the top
and bottom for securing an optional transport lid E7909.
The cabinet incorporates four recessed handles, MAN CF4 stud
plate rigging points and on the rear panel are ratchet strap guide
plates (kelping bars) and four heavy duty wheels.
Only operate B1-SUB cabinets with a d&b D12 amplifier in "Dual
channel" and B1-SUB mode or an A1 mainframe fitted with a B1-
SUB controller module, otherwise there is a risk of damaging the
loudspeaker components.
Connections
The B1-SUB cabinet is fitted with a single EP5 connector and uses
the pin assignments 3/4 and 5 (Pin 5: SenseDrive - D12 in
conjunction with 5-wire cables).
The B1-SUB can be supplied with a single CACOM connector as an
option to drive the B1-SUB cabinet with the d&b A1 mainframe.
SenseDrive is also available when the B1-SUB is driven by the A1
mainframe.
Operation with D12
Selecting "Dual channel" and B1 mode enables a single B1-SUB
OUT A
SenseDrive
cabinet to be driven by each channel.
when SUB
selected
OUT B
SenseDrive
when SUB
selected
(2.0E)
B1-SUB
Page 4 of 6