d&b audiotechnik Z5160 Montaj Talimatları - Sayfa 4

Adaptör d&b audiotechnik Z5160 için çevrimiçi göz atın veya pdf Montaj Talimatları indirin. d&b audiotechnik Z5160 6 sayfaları. Load adapter

Sayfayı Yazdır

LOCK PIN

SECURELY

BEFORE LIFTING

ONLY UNLOCK FOR

CAUTION

DISASSEMBLY ON

GROUND

[2]

[1]

[3]

Fig. 5: Z5160 Load adapter Part list

Z5160 Mounting instructions

WARNING!

− 1 x Z5160 Load adapter [1] including:

1.3 kg/2.9 lb

(1.0E)

Safety instructions

The Z5160 Load adapter must only be used in

conjunction with the d&b Q-Series rigging accessories

and

loudspeaker

instructions and in the Q-Series Rigging manual.

Installation should only be carried out by fully trained

personel. There are certain rules for installation that must

be complied with.

It is the responsibility of the person installing the

assembly to ensure that the structure being attached to is

suitable for the intended use.

Secondary safeties must always be provided and used

when flying or fixing loudspeaker loads overhead.

Load safety information

The maximum permitted working load limit (WLL) of the

Z5160 Load adapter is 500 kg/1100 lb in terms of using

the shackle.

Using the Z5147 Rota Clamp the maximum permitted

working load limit (WLL) is 250 kg/550 lb

The Load adapter must only be moved beyound the rear

edge of the bar of the flying frame while the "1/1 hole"

of the adapter must to be kept in line with the last hole

(hole 27) of the flying frame.

Ensure both locking pins are inserted and locked securely

before lifting the array.

Part list Z5160 Load adapter

− 1 x 2t Shackle [2]

− 2 x Locking pins [3] (B2212) connected together with a steel wire

and fixed to the load adapter.

Weight Z5160 Load adapter

described

this

mounting

Page 4 of 6